氣力輸送系統的設計：
Design of pneumatic conveying system:
氣力輸送系統的設計方法一般適用于低壓吸引氣力輸送，而對于容積式的高壓壓送式主要是依靠實踐經驗進行，并結合在實際運行中的情況加以綜合考慮來進行設計。
The design method of the pneumatic conveying system is generally applicable to the low-pressure suction pneumatic conveying, while the volumetric high-pressure pressure conveying system is mainly designed by relying on practical experience and considering the actual operation conditions.
低壓吸引式氣力輸送方式多為低壓和短距離輸送，因而可以不考慮空氣的壓縮性，把氣流速度及密度看做不變的進行計算。
The low pressure suction pneumatic conveying mode is mostly low pressure and short distance conveying, so the air compressibility can be ignored and the air velocity and density can be calculated as constant.
氣力輸送系統輸送流程圖
Flow chart of pneumatic conveying system
對于長距離的高壓壓送式氣力輸送，其輸送壓力高達幾十萬帕，空氣的可壓縮性則不可忽視。通常吸引式氣力輸送系統的設計計算方法如下：
For long distance high-pressure pneumatic conveying, the conveying pressure is as high as several hundred thousand Pa, and the compressibility of air cannot be ignored. Generally, the design calculation method of the suction pneumatic conveying system is as follows:
1、根據物料的特性以及阿基米德準數Ar來計算物料的懸浮速度。
1. The suspension velocity of the material is calculated according to the characteristics of the material and the Archimedes number Ar.
2、根據懸浮速度以及輸送物料的不同情況下的經驗系數，確定工作速度。
2. The working speed is determined according to the suspension speed and the empirical coefficient under different conditions of conveying materials.
3、根據輸送形式所的混合比以及輸送物料的量來決定輸送空氣量和輸送管直徑。
3. The amount of air to be conveyed and the diameter of the conveying pipe are determined according to the recommended mixing ratio of the conveying form and the amount of materials to be conveyed.
4、根據整個系統線路布置圖，計算系統的壓力損失。
4. Calculate the pressure loss of the system according to the circuit layout of the whole system.
5、根據求得的輸送空氣量和總壓力損失選擇合適的羅茨風機。
5. The appropriate Roots blower shall be selected according to the calculated delivery air volume and total pressure loss.
氣力輸送系統的主要部件有：輸送管道、供料裝置、氣固分離設備和供氣設備。
The main components of the pneumatic conveying system are: conveying pipeline, feeding device, gas-solid separation equipment and gas supply equipment.
吸送式、壓送式相結合氣力輸送系統
Combined pneumatic conveying system of suction type and pressure type
The above is a detailed introduction to the design of Guangxi pneumatic conveying scheme. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.rohs-international.com/
TEL:400-9901-557
TEL:18678880998
公司地址：山東省濟南市章丘區相公街道大康村村南
濟南道源豐達機械制造有限公司
備案號：魯ICP備2022009540號-1 魯公網安備37018102000745號
